66
Connecting to a Computer
Connecting to Televisions, Computers, and Printers
5 Disconnect the camera once transfer is complete.
• If the USB option is set to [PTP]
Turn the camera off and disconnect the USB cable.
• If the USB option is set to [Mass storage]
Remove the camera from the system as described below before turning the
camera off and disconnecting the USB cable.
Windows Vista/XP Home Edition/Windows XP Professional
Click the [Safely Remove Hardware] icon ( ) in
the taskbar and select [Safely remove USB Mass
Storage Device] from the menu displayed.
Windows 2000 Professional
Click the [Unplug or Eject Hardware] icon ( )
in the taskbar and select [Stop USB Mass Storage
Device] from the menu displayed.
Macintosh
Drag the untitled camera volume (“NO NAME”) to the Trash.
k Marking Pictures for Transfer
When d is pressed while the camera is connected to a com-
puter, pictures marked with the E icon during playback will
be transferred to the computer. As the default setting, all pic-
tures are automatically marked for transfer. Two options con-
trol transfer marking:
• [Interface]>[Auto transfer] in the setup menu: Choose [On] to
mark all new pictures for transfer (c 103).
• [Transfer marking] in the playback menu: Change marking
for existing pictures (c 89).
/
0004.JPG
0004.JPG
15/05/2007 15:30
15/05/2007 15:30
4
4
To Next Page
Loading...
