Nikon Coolpix L14 - Setting Display Language, Date and Time

14
First Steps
Setting Display Language, Date and Time
A language-selection dialog and date menu are displayed the first time the
camera is turned on.
1 Press the power switch to turn on the camera.
The power-on lamp (green) will light for a moment and
the monitor will turn on.
2 Use the multi selector to choose the desired
language and press k.
For information on using the multi selector, see “The Multi
Selector” (A 9).
3 Choose [Yes] and press k.
If [No] is selected, the date and time will not be set.
Proceed to step 8.
4 Press k.
The home time zone menu is displayed.
D Daylight Saving Time
If daylight saving time is in effect, turn on [Daylight saving] in the time zone menu and set the date.
1 Before pressing K, press the multi selector I to choose [Daylight saving].
2 Press k to enable daylight saving time (w). Pressing k toggles the daylight saving time option
on and off.
3 Press the multi selector H, and then press K to proceed to step 5.
When daylight saving time ends, turn [Daylight saving] off from the date menu (A 80) in the setup
menu. The camera’s clock is automatically set back one hour.
Date
Set time and date?
No
Ye s
Time zone
London,Casablanca
Daylight saving