r_
z
rD
Display
12,18System error
0
Problem " Solution
Error has occurred in Turn camera off, remove
camera's internal circuitry, and reinsert batteries, and
_)/r_ Running out of ink or
Printer error: check _rinter error.
printer status.
_)/w4" Specified size of paper is
Printer error: not loaded in printer.
check paper
_)/w4" Paper has jammed in the
Printer error: _rinter.
paper jam
_)/w4" No paper is loaded in
Printer error: _rinter.
out of paper
_)/w4" Ink error.
Printer error:
check ink
_)/w4" Ink cartridge isempty.
Printer error:
out of ink
_)P4" An error caused by the
Printer error: image file has occurred.
file corrupt
See the documentation provided with your printer for further guidance and
information.
turn camera on. Iferror
persists, contact retailer or
Nikon-authorized service
representative.
Check printer. After
checking the ink or solving
the problem, select
Resume and press _) to
resume printing.
Load the specified paper,
sdect Resume and press
_) to resume printing.
Eject thejammed paper,
sdect Resume and press
_) to resume printing.
Load the specified paper,
select Resume and press
_) to resume printing.
Check ink, select Resume
and pre_ _) to resume
printing.
Replace ink, select Resume
and pre_ _) to resume
printing.
Select Cancel and press _)
to cancel printing.
112
To Next Page
Loading...
