In I_ (easy auto) mode, the camera automatically determines an appropriate
shooting mode when you frame a picture, allowing you to easily take pictures
using a shooting mode that suits tile scene.
1 Press the power switch to turn on the camera.
The power-on lamp (green) will light for a moment and
the monitor will turn on. The lens will extend at this time.
Easyauto mode is set at the time of purchase. Proceed to
step 4.
_ 2 Press the shooting mode button to display
o the shooting-mode selection menu.
-<
o_
m_ 3 Press the multi selector AVto choose I_
-_ and press _).
c ° The camera enters I_ (easy auto) mode.
&
rD
18
4 Check the battery level and number of Battery level indicator
exposures remaining.
Battery level indicator
Monitor
NO INDICATOR
Battery
exhausted.
Description
The battery level is high.
Batteries low.
Prepare to replace batteries.
i Cannot take pictures. Replace
i with new batteries.
Number of exposures
remaining
Number of Exposures Remaining
The number of pictures that can be stored depends on the capacity of the internal
memory or memory card and image mode setting _ 72.
To Next Page
Loading...
