Using the Zoom
Use the zoom buttons to activate optical zoom.
PressT to zoom in on the subject.
PressW to zoom out.
Zoom indicator is displayed on the top of the monitor
when the zoom buttons are pressed.
Zoom out Zoom in
I
Optical Digital
zoom zoom
Digital Zoom
When tile optical zoom is set at tile telephoto end, i.e.at maximum magnification,
holding down T triggers digital zooming.The subject is magnified up to a max.
optical zoom magnification of 4x.
The focus area is not displayed when digital zoom is in effect, and focus will be in
the (:enter of the screen.
TLTD @ FTqT_D
Maximum magnification Digital zoom is in effect.
of optical zoom.
o
,<
o_
:i>
c
o_
rD
[] Digital Zoom and Interpolation
Unlike optical zoom, digital zoom uses a digital imaging process known as interpolation to magnify
images, resulting in slight deterioration of picture quality.
Interpolation is applied at zoom positions beyond _'k
When zoom is increased beyond the _'k position, interpolation is initiated and the zoom indicator
turns yellow to indicate that interpolation is being applied.
The position of _'k moves to the right as image size decreases, allowing for confirmation of the
zoom positions at which shooting without interpolation is possible at the current image mode
setting.
When the image size is small.
21
To Next Page
Loading...
