Whenusingtheself-timer,picturesaretaken10secondsaftertheshutter-release
buttonispressed.Whenusingtheself-timer,useofatripodisrec:ommended.
1 Press <Q)(self-timer).
The self-timer menu is displayed.
_>
c
&
rD
2 _).Usethemultiselect°rt°ch°°seONandpress _,
The self-timer icon (_) 1O)is displayed.
Ifa setting is not applied by pressing 0 within a few
seconds, the selection will be cancelled.
3 Frame the picture and press the
i
sh utter-release button halfway. 1
Focus and exposure will be set.
4 Press the shutter-release button the I
rest of the way down.
The self-timer starts and the number of seconds
remaining until the shutter is released is
displayed in the monitor.The self-timer lamp
will blink. The lamp stops blinking one second
before the picture is taken and remains lit until
the shutter is released.
When the shutter is released, the self-timer will
be set to OFF.
To stop the timer before a picture is taken, press
the shutter-release button again.
3O
To Next Page
Loading...
