o
m
o
y.
c
2
8
The camera detects a smiling face to shoot the face automatically
1 Pressthe shooting mode button in 1
shooting mode to display the r--Ii_
1
shooting-mode selection menu
and use the multi selector • or •
to choose [Y-] and press _).
2 Frame the picture. _1_
• Point the camera at the subject.
• If the camera recognizes a person's face (facing front),
the face will be framed by a double yellow border in
the focus area, and when the face comes into focus,
the double border will instantly turn green and the
focus will be locked.
• When the faces of multiple people are recognized, the face nearest the center of the
screen will be framed by a double border in the focus area and the other faces will be
framed by a single border. Up to three faces will be recognized.
3 The shutter is automatically released.
• If the camera detects the smiling face of the person framed by a double border, the
shutter isautomatically released.
• If the camera recognizes a person's face, the sdfaimer ]amp ([_] 4) blinks. Just after
the shutter is released, the self timer lamp blinks rapidly
• Each time the shutter is released the camera again begins face recognition and smile
detection operations for continuous automatic shooting.
4 Exit smile mode by pressing the shooting _--B_
mode button.
Change to another shooting mode
44
[] Shooting in the Smile Mode
When using Smile mode, auto off (_ 94) will turn the camera off if no operations are performed in
the following situations:
• The camera does not recognize any faces,
• The camera recognized the face but cannot detect a smiling face.