11
Basic Operations
Introduction
Switching Between Tabs of Menu Screen
When using the following modes, you can display the tabs by pressing the multi
selector J while the menu is displayed.
• Easy auto mode, scene mode, and movie mode
The Shutter-release Button
The camera features a two-stage shutter-release button. To set focus and
exposure, press the shutter-release button halfway, stopping when you feel
resistance. When the shutter-release button is pressed halfway, focus and
exposure (shutter speed and aperture value) are set. Focus and exposure remain
locked while the shutter-release button is pressed halfway.
While the shutter-release button is held in this position, release the shutter and
take a picture by pressing the shutter-release button the rest of the way down. Do
not use force when pressing the shutter-release button, as this may result in
camera shake and blurred images.
Shooting menu
Image mode
White balance
Color options
Continuous
Shooting menu
Image mode
White balance
Color options
Continuous
Set up
Time zone and date
Monitor settings
AF assist
Print date
Electronic VR
Motion detection
Welcome screen
Press the multi selector
J to highlight the tab.
The selected menu will
be displayed.
Press the multi selector
HI to select a tab and
press the k button or K.
Press halfway to set
focus and exposure
Press the rest of the
way down to take a
picture
To Next Page
Loading...
