29
Basic Photography and Playback: G Easy Auto Mode
Adjusting the Brightness: Exposure Compensation
The brightness of the entire image can be increased or decreased by setting the
exposure compensation when taking a picture.
1 Press o (exposure compensation) on the
multi selector.
The exposure compensation guide is displayed.
2 Press the multi selector H or I to select a
compensation value.
To make the subject brighter, adjust the exposure
compensation to the “+” side.
To make the subject darker, adjust the exposure
compensation to the “-” side.
3 Press the k button.
If a setting is not applied by pressing the k button within a few seconds, the selection
will be cancelled.
When set to any value other than 0.0, H and the value are displayed.
4 Press the shutter-release button to shoot.
To turn off exposure compensation, repeat from step 1
and set the value to 0.0, then press the k button.
+0.3
Exposure compensation
0.0
8
C Exposure Compensation Value
he exposure compensation setting applied in A (auto) mode (A 46) is saved in the camera’s
memory even after the camera is turned off.