E34
Reference Section
The Image Selection Screen
When using one of the following features, a screen like that
shown on the right is displayed when selecting images.
• Print order > Select images (E29)
• Protect (E33)
• Rotate image (E35)
• Copy > Selected images (E36)
• Welcome screen > Select an image (E40)
• Delete image > Erase selected images (A 31)
Follow the procedures described below to select the images.
1 Press the multi selector J or K to select an
image.
• Rotate the zoom control (A 2, 4) to g (i) to switch to full-
frame playback or f (h) to switch back to 12-thumbnail
display.
• Only one image can be selected for Rotate image and
Welcome screen. Proceed to step 3.
2 Press H or I to select or deselect (or to
specify the number of copies).
• When an image is selected, a check mark (y) is displayed
with the image. Repeat steps 1 and 2 to select additional
images.
3 Press the k button to apply image selection.
• When Selected images is selected, a confirmation dialog is displayed. Follow the
instructions displayed in the monitor.
ON/OFF
Back
Protect
ON/OFF
Back
Protect
ON/OFF
Back
Protect
To Next Page
Loading...
