F14
Technical Notes and Index
Images are not displayed on
TV.
• Video mode is not correctly set in the setup menu.
• Memory card contains no images. Replace the
memory card. Remove the memory card to play
back images from the internal memory.
87, E55
13
Nikon Transfer 2 does not
start when camera is
connected.
• Camera is off.
• Battery is exhausted.
• USB cable is not correctly connected.
• Camera is not recognized by the computer.
• Confirm system requirements.
• Computer is not set to start Nikon Transfer 2
automatically. For more information about Nikon
Transfer 2, refer to help information contained in
ViewNX 2.
21
21
69, 74
–
71
74
Images to be printed are not
displayed.
• Memory card contains no images. Replace the
memory card.
• Remove the memory card to print images from the
internal memory.
13
Cannot select paper size
with camera.
Paper size cannot be selected from the camera in the
following situations, even when printing from a
PictBridge-compatible printer. Use the printer to
select paper size.
• The printer does not support the paper sizes
specified by the camera.
• The printer automatically selects the paper size.
69, E18,
E19
–
Problem Cause/Solution A
To Next Page
Loading...
