45
Taking Pictures in the One-Touch Portrait Mode
One-Touch Portrait Mode
j Face-Priority AF
• The camera’s ability to detect faces depends on a variety of factors, including whether or
not the subject is facing the camera.
• The camera will focus continuously until a face detected.
• If the yellow double border blinks when the shutter-release button is pressed halfway, the
camera was unable to focus. Release the button and try again.
• If no face is recognized when the shutter-release button is pressed halfway, the camera
focus is on the center of the frame.
• The camera may be unable to detect faces in the following situations;
- When faces are partially hidden by sunglasses or other obstructions
- When faces take up too much or too little of the frame
• When face-priority AF recognizes one or more faces with shooting in “tall” orientation, pic-
tures are displayed in “tall” orientation when played back in the camera monitor.
k Settings for One-Touch Portrait Mode
• Flash: Changeable
• Self-timer/Exposure compensation: Available
• Macro close-up: Off
• One-touch portrait: Changeable (c 46)
To Next Page
Loading...
