Nikon Coolpix L5 - Connecting Camera and Printer Steps; Setting USB Option and Printer Power On; USB Cable Connection Best Practices

65
Connecting to a Printer
Connecting to Televisions, Computers, and Printers
Connecting the Camera and Printer
1 Set the USB option (c 61) to [PTP].
2 Turn the camera off.
3 Turn the printer on.
• Check printer settings.
4 Connect the USB cable as shown below.
5 Turn the camera on.
• The PictBridge start-up screen ( ) will be displayed
in the camera monitor. The camera will then enter
full-frame playback with the PictBridge logo dis-
played in the top left corner of the monitor ( ).
j Connecting the USB Cable
• When connecting the USB cable, be sure that the connectors are oriented correctly. Do not
use force when connecting the USB cable. When disconnecting the USB cable, do not pull
the connector at an angle.
• Do not pinch the connector cover between the camera’s USB connector and the USB cable
connector when connecting the cable to the camera.
USB
PTP
Mass storage
MENU
Exit
PictBridge
4/
4/
4
::
OK
4/ 4