111
Connecting the Camera to a TV, Printer, or Computer
Transferring Images to a Computer (ViewNX-i)
2 After Nikon Transfer 2 starts, click Start Transfer.
• Image transfer begins. When image transfer is complete, ViewNX-i starts and the
transferred images are displayed.
3 Terminate the connection.
• If you are using a card reader or card slot, choose the appropriate option in the
computer operating system to eject the removable disk corresponding to the
memory card and then remove the memory card from the card reader or card slot.
• If the camera is connected to the computer, turn the camera off and disconnect the
USB cable.
C Capture NX-D
Capture NX-D is Nikon software that enables you to fine-tune photos or change settings for
NEF (RAW) pictures and save them in other formats.
Download the software from the website at the URL below.
http://downloadcenter.nikonimglib.com
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
