158
Using the Menu
The Playback Menu
Slide Show
Play back images one by one in an automated “slide show.” When movie files are
played back in the slide show, only the first frame of each movie is displayed.
1 Use the multi selector HI to select
Start and press the k button.
• The slide show begins.
• To change the interval between images, select
Frame intvl, press the k button, and specify the
desired interval time before selecting Start.
• To repeat the slide show automatically, select
Loop and press the k button before selecting
Start.
• The maximum playback time is up to about 30 minutes even if Loop is enabled.
2 End or restart the slide show.
• The screen shown on the right is displayed after
the slide show ends or is paused. To exit the show,
select G and then press the k button. To
resume the slide show, select F and then press
the k button.
Operations During Playback
• Use the multi selector HIJK to display the previous/next image. Press and hold
down to rewind/fast-forward images.
• Press the k button to pause or end the slide show.
Press the c button (playback mode) M d button M Slide show M k button
Start
Slide show
Frame intvl
Pause
Loop
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
