167
Using the Menu
The Setup Menu
Monitor Settings
* To display or hide these indicators, press the s (display) button when On is selected (A8).
Press the d button M z menu icon M Monitor settings M k button
Option Description
Image review
Set whether or not to display the captured image immediately after
shooting.
• Default setting: On
Monitor options
Adjust the monitor brightness and hue.
• Use the multi selector HI to adjust brightness, JK to adjust hue
and then press the k button.
• Default setting: Brightness 3, Hue 0
• Cannot be set when the viewfinder is used.
EVF options
Adjust the viewfinder brightness and hue.
• Use the multi selector HI to adjust brightness, JK to adjust hue
and then press the k button.
• Default setting:Brightness 3, Hue 0
• Cannot be set when the monitor is used.
View/hide
framing grid*
Set whether or not to display a boxed guide for framing on the
shooting screen.
• Default setting: Off
• The framing grid is not displayed when the enlarged center of the
image is displayed on the screen while using manual focus.
View/hide
histograms*
Set whether or not to display a graph that shows the brightness
distribution in the image (A11, 69) on the shooting screen.
• Default setting: Off
• Can be displayed only in the following shooting modes:
- When in j, k, l, or m mode (if Face priority, Manual (spot),
Manual (normal), or Manual (wide) is selected in AF area
mode)
- When in scene modes (except Easy panorama)
• The histogram is not displayed on the screen during movie
recording or while using manual focus.
Virtual horizon*
Set whether or not to display a virtual horizon on the shooting screen
(A168).
• Default setting: Off
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
