171
Using the Menu
The Setup Menu
Vibration Reduction
Select the vibration reduction setting used when shooting.
Select Off when using a tripod to stabilize the camera during shooting.
B Notes About Vibration Reduction
• After turning on the camera or after switching from playback mode to shooting mode,
wait until the shooting screen is ready before taking pictures.
• Normal or Active is recommended if you are not concerned about the slight variations in
image composition that may occur. The amount of camera shake compensation is higher
than that of Normal (framing first) or Active (framing first).
• Normal (framing first) is recommended when you intend to significantly change the
direction of the camera while shooting, such as when panning. The camera automatically
detects the panning direction and only compensates for vibration caused by camera
shake.
• Images on the screen may be displayed blurry immediately after shooting.
• Vibration reduction may be unable to completely eliminate the effects of camera shake in
some situations.
Press the d button M z menu icon M Vibration reduction M k button
Option Description
g
Normal
(default setting)
Suited to capturing images of subjects that are not moving.
Z Active
Suited to capturing images if a relatively large camera shake is
likely to occur, such as when shooting from a car or under
poor foothold conditions.
R
Normal (framing
first)
Compared to the Normal setting, you can reduce the amount
of difference between your intended composition and the
captured image.
S
Active (framing
first)
Compared to the Active setting, you can reduce the amount
of difference between your intended composition and the
captured image.
Off Compensation is not performed.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
