198
Technical Notes
Error Messages
* See the documentation provided with your printer for further guidance and information.
Printer error: check
printer status.
After solving the problem, select Resume and press the
k button to resume printing.*
–
Printer error: check
paper.
Load the specified size of paper, select Resume, and
press the k button to resume printing.*
–
Printer error: paper
jam.
Remove the jammed paper, select Resume, and press
the k button to resume printing.*
–
Printer error: out of
paper.
Load the specified size of paper, select Resume, and
press the k button to resume printing.*
–
Printer error: check
ink.
There is a problem with the printer’s ink.
Check the ink, select Resume, and press the k button
to resume printing.*
–
Printer error: out of
ink.
Replace the ink cartridge, select Resume, and press the
k button to resume printing.*
–
Printer error: file
corrupt.
There is a problem with the image file to be printed.
Select Cancel and press the k button to cancel
printing.
–
Clean HDMI output
enabled. Select
“Movie manual”
mode.
When Clean HDMI output is set to On and the camera
is connected to an HDMI-compatible device, rotate the
mode dial to Movie manual.
94
Display Cause/Solution A
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
