136
Connecting to a Printer
Connecting to Televisions, Computers and Printers
Connecting the Camera and Printer
1
Turn off the camera.
2
Turn on the printer.
• Check the printer settings.
3
Connect the camera to the printer using the supplied USB cable.
• Be sure that connectors are properly oriented. Do not attempt to insert connectors at
an angle, and do not use force when connecting or disconnecting the USB cable.
4
The camera is automatically turned on.
• When connected correctly, the PictBridge startup
screen (1) is displayed in the camera monitor. Then the
Print selection screen (2) is displayed.
B If the PictBridge Startup Screen Is Not Displayed
Turn the camera off and disconnect the USB cable. Set the Charge by computer option (A156) in
the camera’s setup menu to Off and reconnect the cable.
32
32
NO.
Print selection
15/05
2011
12
To Next Page
Loading...
