48
A, B, C, D Modes (Setting the Exposure for Shooting)
Shooting Features
B Notes on Shooting
• When zooming is performed after the exposure is set, exposure combinations or aperture value
may be changed.
• When the subject is too dark or too bright, it may not be possible to obtain the appropriate
exposure. In such cases, the shutter speed indicator or aperture value indicator flashes when the
shutter-release button is pressed halfway (except when the D mode is used). Change the shutter
speed setting or aperture value. When settings such as Built-in ND filter (A66) or ISO
sensitivity (A66) are changed, the appropriate exposure may be obtained.
B Note on ISO Sensitivity
When ISO sensitivity (A66) is set to Auto or Fixed range auto, the ISO sensitivity in D mode is
fixed at ISO 80.
Changing A, B, C, D Modes
• Features That Can Be Set Using the Multi Selector ➝ A51
• Features That Can Be Set Using the d (Menu) Button
- Shooting menu ➝ A64
- Setup menu ➝ A103
• Functions That Can Be Set Using the Fn (Function) Button ➝ A68
To Next Page
Loading...
