Basic
Camera
Setup:
The
Setup
Menu
-4))
Sound Settings
Adjust
the
following sound settings.
Button
sound
Turn
button
sound on or off.
When [On] (default setting)
is
selected, a beep will sound once
when
operations
are
completed successfully,
twice
when
the camera acquires focus on the subject, and
three times
when
an
error
is
detected. Start-up sound will also play
when
the
camera
is
turned on.
Shutter
sound
Choose shutter sound from [On] (default setting) or [Off].
e.>
Auto
Off
If
no
operations
are
performed for
the
selected length
of
time, the
monitor
will
turn
off
and the camera will enter standby
mode
(~
23)
to
reduce the drain on
the
battery. The power-on lamp will blink
in
standby mode. If
no
operations are
performed for
about
another three minutes,
the
camera will turn
off
automatically.
Choose the
time
allowed
to
elapse before the camera enters standby mode. The
time
options
are
[30s],
[1
m] (default setting), [5m], and [30m].
B Notes on Auto
Off
Regardless
of
the
option
selected,
the
monitor
will remain on for three minutes
when
menus
are
displayed,
or
for
30
minutes
during
continuous
playback for slide shows or
when
the
AC
Adapter
130
EH-62A (available separately from Nikon)
is
connected.
To Next Page
Loading...
