Step 1Turn
the
Camera On and Select 0 (Auto)
Mode
Indicators Displayed in 0 (Auto)
Mode
Shooting
mode
~
displayed
in
01
(auto) mode.
Image
quality/Image
size
Current image quality and size
settings are displayed. The default
settings are _ (Normal) for
image quality and
~
(4,000 x
3,000) for image size.
Internal
memory
indicator
Pictures will be recorded to internal memory.
When
memory
card
is
inserted,
@J
is
not
displayed and pictures will be recorded to
memory
card.
Vibration reduction icon
Vibration reduction can be applied
to reduce
the
effects
of
camera
shake.
Aperture
(~
45)
Shutter speed
(~
45)
~
Available Functions in 0 (Auto)
Mode
In
01
(auto) mode, focus
mode
(~
33)
and exposure compensation
(~
34)
can be applied and
the
camera can shoot using
the
flash
mode
(~
30)
and self-timer
(~
32).
Pressing
MENU
displays the
shooting menu options for specifying the image quality
(~91)
and image
size
(~92).
~
Vibration Reduction
[Vibration reduction]
(~
128),
when
[On] (default setting)
is
selected, can be applied
to
effectively
reduce blur, caused by slight hand
movement
known
as
camera shake, that
commonly
occurs
when
shooting
with
zoom applied
or
at slow shutter speeds.
Vibration reduction can be used in
all
shooting modes.
~
Auto Power-Off in 0 (Auto)
Mode
(Standby
Mode)
The
monitor
will
dim
to
reduce
the
drain on
the
battery ifno operations
are
performed for
about
five
seconds. The
monitor
will brighten
when
camera controls
are
used. At default settings,
the
monitor
will turn
off
altogether
if
no operations
are
performed for about a
minute
during shooting and
playback. The camera will turn
off
automatically if no operations
are
performed for another three
minutes
(~
130).
23
To Next Page
Loading...
