88
Selecting the Focus Area (A, B, C, D Modes)
More on Shooting
Focusing on Moving Subjects for Shooting (Subject Tracking)
To focus on moving subjects, set the autofocus area setting to s (subject tracking)
in shooting mode A, B, C, D, E, F, N or O (low noise night). Subject tracking
begins once you select a subject to be focused on, and the focus area will move and
follow the subject.
1
Press G (AF area mode) on the rotary multi
selector.
• The AF area mode menu is displayed.
2
Rotate the rotary multi selector to choose s
(subject tracking) and press the k button.
• The camera enters subject tracking, and a white border
is displayed in the center of the frame.
• If the k button is not pressed within a few seconds, the
selection is set and the setting menu disappears.
3
Select a subject.
• Frame the subject in the center of the border, and press
the k button.
- The subject is registered.
- When the camera is unable to focus on the subject,
the border lights in red. Change the composition and
try again.
• Once the subject is registered, it is framed by a yellow
focus area display, and subject tracking begins.
• To change subjects, press the k button to cancel the
currently selected subject, then select a new subject.
• If the camera loses sight of the subject, the focus area
display disappears; register the subject again.
Subject tracking
Start
Start
To Next Page
Loading...
