180
Setup Menu
Basic Camera Setup
Record Orientation
Set whether or not to record the orientation data with the picture when shooting.
The orientation data can be changed after shooting using Rotate image in the
playback menu (A130).
B Notes on Recording the Orientation Data
• In continuous or auto bracketing mode, all pictures are recorded with the same orientation data as
the first picture.
• Correct orientation data may not be obtained for pictures recorded with the camera facing up or
down.
Press the d button M z (Setup menu) (A168) M Record orientation
Auto (default setting)
Record the orientation data with the picture when shooting. When the picture is
played back, the recorded orientation data is used to automatically rotate the
picture for display.
The following three data orientation types for the camera can be recorded.
Off
The orientation data is not recorded. Pictures are always displayed in the horizontal
position.
Horizontal position Vertical position with
the right side on top
Vertical position with
the left side on top
To Next Page
Loading...
