Nikon CoolPix P7000 - Reset File Numbering

188
Setup Menu
Basic Camera Setup
Registering into My Menu
1 Use the rotary multi selector to choose the
menu item and press the k button.
• The menu item selection screen is displayed.
2 Choose the menu item to be registered and
press the k button.
• The chosen menu item is switched.
• To finish the setting, press the rotary multi selector J.
Reset File Numbering
When Ye s is selected, the sequential numbering of file numbers is reset (A203).
After resetting, a new folder is created and the file number for the next image taken
starts from “0001.”
B Notes on Reset file numbering
• Reset file numbering cannot be used when scene mode is set to Panorama assist, or if Intvl
timer shooting is chosen for Continuous when A, B, C, D, E, F or N shooting modes are
used. For Panorama assist or Intvl timer shooting, a new folder is created, and file numbers are
assigned automatically starting with “0001” (A203, 204).
• Reset file numbering cannot be applied when the folder number reaches 999 and there are
images in the folder. Insert a new memory card, or format the internal memory/memory card
(A182).
Press the d button M z (Setup menu) (A168) M Reset file numbering
Customize My Menu
Picture Control
Active D-Lighting
Distortion control
Metering
Continuous
Autofocus mode
Customize My Menu : 1
Picture Control
Custom Picture Control
Metering
Continuous
Autofocus mode
Flash exp. comp.
Flash control