109
Playback Options: The Playback Menu
Shooting, Playback and Setup Menus
Selecting Multiple Pictures
The picture selection screen, as shown at right, will be
displayed with the following menus:
• Playback menu:print set (A 84), delete (A 111),
protect (A 111), rotate image
(A 112), hide image (A 112),
copy (A 113)
• Setup menu: welcome screen (A 116)
Follow the procedure described below to select multiple pictures.
1 Press the multi selector J or K to choose the
desired picture.
The command dial can also be used in place of the multi
selector.
Only one picture can be selected for Welcome screen.
Proceed to step 3.
Rotate the zoom control to g (i) to switch to full-frame
playback.
Rotate the zoom control to f (h) to switch back to thumbnail display.
2 Press H or I to select ON or OFF (or the
number of copies).
When ON is selected, a check mark (y) is displayed in the
top left corner of the current picture. Repeat steps 1 and 2
to select additional pictures.
3 Press k.
The setting is enabled.
When using Rotate image, select an orientation with the
multi selector, and then press k.
Back
Protect
ON/OFF
Back
Protect
ON/OFF
Back
Protect
ON/OFF
Done
To Next Page
Loading...
