14
Basic Steps for Shooting and Playback
Basic Steps for Shooting and Playback
Preparation 1 Insert the Battery
1 Open the battery-chamber/memory
card slot cover.
2 Insert the included
EN-EL19 battery
(rechargeable Li-ion
battery).
• Use the edge of the battery to
push the orange battery latch
in the direction indicated by
the arrow (
1
) and fully insert
the battery (
2
).
• When the battery is inserted
correctly, the battery latch will
lock the battery in place.
B Inserting the Battery Correctly
Inserting the battery upside down or backwards could damage the camera. Be sure to
check that the battery is in the correct orientation.
3 Close the battery-chamber/memory
card slot cover.
• Charge the battery before first use or when it is
running low. See page 16 for more information.
Battery latch
To Next Page
Loading...
