E34
Reference Section
Editing Movies
The desired portions of a recorded movie can be saved as a separate file (except
movies recorded using p iFrame 540 (960×540) (E 58)).
1 Play back the desired movie and pause playback (A 94).
2 Press the multi selector J or K to choose L
on the control panel, and press the k button.
• The movie edit screen is displayed.
3 Press H or I to choose M (Choose start
point) on the control panel.
• When editing begins, the frame where playback was
paused is the start point.
• Press the multi selector J or K to move the start point
to the beginning of the desired portion of the movie.
• To cancel editing, choose H or I and select O (Back)
and press the k button.
4 Press H or I to choose N (Choose end
point).
• Press the multi selector J or K to move the end point
on the right edge to the end of the desired portion of
the movie.
• Select c (Preview) and press the k button to play
back the specified portion of the movie that will be
saved. While the preview is playing, rotate the zoom control to g or f to adjust
playback volume. While the preview is playing back, press the k button to stop
playback.
5 When the settings are finished, press H or I to choose m Save, press
the k button.
1 m30s
Choose start point
Choose end point
To Next Page
Loading...
