E36
Reference Section
Smart Portrait Menu
• See “Changing the Image Size (Image Mode)” (A 61) for information about
Image mode.
Skin Softening
Enable skin softening. When the shutter is released, the camera detects one or
more human faces (up to three), and processes the picture to soften facial skin
tones before saving the picture. The degree of skin softening applied can be
selected from High, Normal (default setting), and Low.
• The current setting can be confirmed by the indicator displayed in the monitor
with shooting (A 8). No indicator is displayed when Off is selected. The effects
of skin softening are not visible when framing pictures for shooting. Check the
degree of skin softening performed in playback mode.
Smile Timer
When On (default setting) is selected, the camera detects human faces and then
automatically releases the shutter whenever a smile is detected.
• The current smile timer setting is indicated by an icon when shooting (A 8).
No icon is displayed when Off is selected.
Blink Proof
When On is selected, the camera automatically releases
the shutter twice each time a picture is taken. Of the two
shots, one in which the subject’s eyes are open is saved.
• If the camera saved a picture in which the subject’s
eyes may have been closed, the dialog shown at
right is displayed for a few seconds.
• Flash cannot be used when On is selected.
• The default setting is Off.
• The current blink proof setting is indicated by an icon when shooting (A 8). No
icon is displayed when Off is selected.
In the smart portrait mode screen M d button M F tab M Skin softening
In the smart portrait mode screen M d button M F tab M Smile timer
In the smart portrait mode screen M d button M F tab M Blink proof
A blink was detected in the
picture just taken.
To Next Page
Loading...
