82
General Camera Setup
Brightness
Adjust the brightness. The default setting is 3.
• Use the multi selector JK to select the desired brightness and press flexible
button 4 (O).
Date Stamp
The shooting date and time can be stamped on
images when shooting. The information can be
printed even when using a printer that does not
support the date imprinting function.
B Notes About Date Stamp
• Stamped dates form a permanent part of image data and cannot be deleted. The
date cannot be stamped on images after they have been captured.
• The date cannot be stamped in the following situations:
- When using Take a series of pictures
- Shoot a movie miniature
- When shooting movies
C Printing a Shooting Date on Images Without a Date Stamp
You can transfer images to a computer and use the ViewNX 2 software (A96) to
imprint the shooting date on the images when they are printed.
Enter shooting mode or playback mode M flexible button 4 (l) M flexible
button 4 (l Camera settings) M press HI M K Brightness
Enter shooting mode or playback mode M flexible button 4 (l) M flexible
button 4 (l Camera settings) M press HI M L Date stamp
Option Description
L Date Date is stamped on images.
b Off (default setting) Date is not stamped on images.
15.11.2015
To Next Page
Loading...
