35
Shooting Features
You can select a flash mode to match the shooting conditions.
1 Press the multi selector H (m).
2 Select the desired flash mode
(A36) and press the k button.
• If the setting is not applied by pressing the
k button within a few seconds, the
selection will be canceled.
C The Flash Lamp
• The status of the flash can be confirmed by
pressing the shutter-release button halfway.
- On: The flash fires when you press the
shutter-release button all the way down.
- Flashing: The flash is charging. The camera
cannot shoot images.
- Off: The flash does not fire when a picture is
taken.
• If the battery level is low, the monitor turns off while the flash is charging.
Flash Mode
Auto
To Next Page
Loading...
