69
Using Menus
Using Preset Manual
Use the procedure below to measure the white balance value under the
lighting used during shooting.
1 Place a white or gray reference object under the lighting
that will be used during shooting.
2 Use the multi selector HI to
select Preset manual in the
White balance menu, and press
the k button.
• The camera zooms in to the position for
measuring white balance.
3 Select Measure.
• To apply the last measured value, select
Cancel and press the k button.
4 Frame the white or gray reference
object in the measuring window,
and press the k button to
measure the value.
• The shutter is released and measurement is
complete (no image is saved).
B Notes About Preset Manual
A value for flash lighting cannot be measured with Preset manual. When shooting
using the flash, set White balance to Auto or Flash.
Auto
Auto
Preset manual
Daylight
Daylight
Incandescent
Incandescent
Fluorescent
Fluorescent
Cloudy
Cloudy
White balance
Preset manual
Cancel
Measure
Preset manual
Cancel
Measure
To Next Page
Loading...
