133
Connecting to a Printer
Connecting to Televisions, Computers and Printers
Connecting the Camera to a Printer
1 Turn off the camera.
2 Turn on the printer.
Check printer settings.
3 Connect the camera to the printer using the supplied USB cable.
4 The camera automatically turns on.
When properly connected, the PictBridge startup screen
(
1
) will be displayed in the camera monitor, followed by
the Print selection screen (
2
).
B Connecting the USB Cable
Be sure that connectors are properly oriented. Do not attempt to insert connectors at an angle, and
do not use force when connecting or disconnecting the USB cable.
B If the PictBridge Screen is not Displayed
Turn the camera off and disconnect the USB cable. Set Charge by computer (A 152) in the
camera’s setup menu to Off and reconnect the cable.
20100515 44
Print selection
12
To Next Page
Loading...
