Nikon Coolpix S4100 - Setting Display Language, Date and Time

22
First Steps
Setting Display Language, Date and Time
A language-selection dialog is displayed the first time the camera is turned on.
1 Press the power switch to turn on the camera.
The power-on lamp (green) will light, and then the
monitor will turn on (the power-on lamp turns off when
the monitor turns on).
2 Tap the desired language.
If the desired language is not displayed, tap B or C to
view other language options.
For more information about operating the touch panel,
see “Operating the Touch Panel” (A 8).
3 Tap Yes.
If No is tapped, time zone and date will not be set.
4 Tap E or F to select your home time zone
(A 151) and tap I.
Tap J to return to the previous screen.
D Daylight Saving Time
If daylight saving time is in effect, tap p in the time zone selection
screen displayed in step 4 to turn on the daylight saving time
option.
When the daylight saving time option is enabled, W is displayed at
the top of the monitor. To turn off the daylight saving time option,
tap p again.
Language
Čeština Dansk
Deutsch English
Español Ελληνικά
Français Indonesia
Time zone and date
Choose time zone and
set date and time?
Yes No
Home time zone
Home time zone