56
Adjusting the A (Auto) Mode setting
More on Shooting
Preset Manual
The preset manual option is effective with mixed lighting or to compensate for
light sources with a strong color cast when the desired effect has not been
achieved with white balance settings like Auto and Incandescent (for example,
to make pictures taken under a lamp with a red shade look as though they had
been shot under white light).
Follow the procedure below to measure the white balance value according to the
light source when shooting.
1 Place a white or gray reference object under the lighting that will be
used during shooting.
2 Tap the bottom tab to display the setting
controls (A 42) and tap w.
3 Tap b.
The camera zooms in to the position for measuring white
balance.
4 Frame the reference object in the measuring
window.
To apply the most recently measured value for preset
manual, tap Cancel.
5 Tap Measure to measure a value for preset
manual.
The shutter is released and the new white balance value is
set. No picture is recorded.
To Next Page
Loading...
