E27
Reference Section
When using a commercially available HDMI cable
Connect the plug to the HDMI jack on the TV.
3 Set the TV’s input to external video input.
• See the documentation provided with your TV for details.
4 Hold down the c button to turn on the
camera.
• The camera enters playback mode and images are
displayed on the TV.
• While connected to the TV, the camera monitor will remain
off.
B Notes About Connecting the HDMI Cable
An HDMI cable is not included. Use a commercially available HDMI cable to connect the camera to a
high-definition TV. The output terminal on this camera is an HDMI micro connector (type D). When
purchasing an HDMI cable, be sure that the device end of the cable is an HDMI micro connector.
B Notes About Connecting the Cable
When connecting the cable, be sure that the plug is properly oriented. Do not force the plug into
the camera. When disconnecting the cable, do not pull the plug at an angle.
HDMI micro connector (Type D) to HDMI jack
To Next Page
Loading...
