138
Setup Menu
Basic Camera Setup
Operating the Blink Warning Screen
When the blink warning screen shown at right is
displayed in the monitor, the operations described
below are available.
If no operations are performed within a few seconds,
the camera automatically returns to shooting mode.
To Use Description
Enlarge the detected
face that blinked
g (i) Rotate the zoom control to g (i).
Switch to full-frame
playback
f (h) Rotate the zoom control to f (h).
Select the face to be
displayed
If the camera detects that more than one human
subject blinked, press J or K to switch display to
another face.
Delete the picture l Press the l button.
Switch to shooting
mode
k
Press the k button or the shutter-release button.
Exit
Exit
Did someone b l ink?
To Next Page
Loading...
