Nikon Coolpix S6100 - Using ViewNX 2; Step 7 Copy Images to the Computer

Step 7
Copy Images to the Computer
Use the Nikon Transfer 2 feature ofViewNX 2 to copy images to the computer.
7.1 Turn off the camera.
7.2 Connect the camera and computer with the supplied USB cable.
Confirm that the connector is properly oriented and then gently insert the connector,
making sure
that the connector is not inserted at an angle. When disconnecting, make
sure that
the connector is not removed at an angle.
The camera automatically turns on and the power-on lamp lights. The camera monitor
will remain off.
When the action selection dialog
is displayed on the computer, select Nikon Transfer 2.
When Using Windows 7
When the screen shown below is displayed, use the following procedure to select Nikon
Transfer
2.
f.'
I
Select Nikon Transfer 2 as the program specified for Import pictures and videos.
• Click Change program under Import pictures and videos, and then choose
Import File using Nikon Transfer 2 in the next screen and click OK.
2 Double-click Import File.
Using ViewNX 2