Nikon Coolpix S6100 - Connecting the Camera to a Printer

144
Connecting to a Printer
Connecting to Televisions, Computers and Printers
Connecting the Camera to a Printer
1 Turn off the camera.
2 Turn on the printer.
Check printer settings.
3 Connect the camera to the printer using the supplied USB cable.
Be sure that connectors are properly oriented. Do not attempt to insert connectors at an
angle, and do not use force when connecting or disconnecting the USB cable.
4 The camera is automatically turned on.
When properly connected, the PictBridge startup screen
(
1
) will be displayed in the camera monitor, followed by
the Print selection screen (
2
).
Print selection
44
15/05/2011
12
B If the PictBridge Startup Screen Is Not Displayed
T
urn the camera off and disconnect the USB cable. Set the Charge by computer option (A 165)
in the camera’s setup menu to Off and reconnect the cable.