166
Setup Menu
Basic Camera Setup
d Blink Warning
Specify whether or not the camera detects human subjects that have blinked
using the face detection function (A 42) when shooting in the following modes.
• A (auto) mode (A 26).
• Scene auto selector (A 62), Portrait (A 64) or Night portrait (A 65) is
selected for the scene mode.
Tap the bottom tab (A 150) M Tap z (Setup menu) M d Blink warning
On
When the camera detects that one or more human subjects may have blinked in an
image captured using the face detection function, the Blink warning screen is
displayed in the monitor.
The face of the human subject that may have blinked when the shutter was
released is framed by a yellow border. Should this occur, check the image and
determine whether or not another image should be captured.
See “Operating the Blink Warning Screen” (A 167) for more information.
Off (default setting)
Blink warning is disabled.
B Note on Blink Warning
he blink warning does not function at continuous settings of Continuous, BSS, or Multi-shot 16.
To Next Page
Loading...
