Configuring the Camera’s Wireless Settings
22
o
Specifying Picture Mail Recipients/Recipient Groups
Specify recipients (aliases and e-mail addresses) of e-mail notification sent after picture
upload. Groups containing multiple recipients can also be created. This is useful when
Picture Mail is often sent to the same recipients. Recipients and groups can also be
added, or edited, later using the camera (A 34).
1
Choose Edit address book from the Select Action
dialog (A 16) and click Next.
Click Cancel to cancel configuration.
2 Enter recipient aliases (A 12) and e-mail addresses
(A 12), and click Next.
Enter an alias comprised of up to 16 alphanumerical characters
and an e-mail address comprised of up to 64 alphanumerical
characters.
Up to 30 recipients can be specified.
E-mail addresses for only certain models of cellular telephones,
available in the United States, are supported (A 5).
If user information has been registered, My Alias and My E-
Mail Address are not displayed.
3
Create or edit a recipient group (A 12).
Enter a name for the group, comprised of up to 16
alphanumerical characters.
Up to five groups can be created.
If not creating or editing a recipient group, make no other
changes and click Next.
When Next is clicked, the Action completed successfully dialog,
with options for finishing or performing another action, is
displayed and the recipient settings are applied.
Q7115_Wireless_EN.book Page 22 Tuesday, June 3, 2008 7:34 PM
Configuring the Camera’s Wireless Settings
23
Protecting Wireless LAN Information Stored in the Camera
(Applying a Password/Resetting the Camera)
A password (A 12) can be applied to prevent access to wireless LAN information stored
in the camera, including network profiles and recipient e-mail addresses, by third parties
if the camera should be lost or stolen, or otherwise compromised. In addition, all camera
settings can be restored to their default settings and data stored in the camera’s internal
memory can be deleted before the camera is transferred to another owner or discarded.
Applying a Password to the Camera
Applying a password to the camera to protect wireless LAN information is
recommended.
1 Choose Change password from the Select Action
dialog (A 16) and click Next.
Click Cancel to cancel configuration.
2 Choose Change password and enter the same
password (four-digit number) in the Enter new
password and the Confirm password fields.
If changing the password, also enter the current password in the
Enter old password field.
When Next is clicked, the Action completed successfully dialog,
with options for finishing or performing another action, is
displayed and the password is applied to the camera.
Proceed to “q Finishing Wireless Settings” (A 25).
Once recipients and recipients group have been specified,proceed as indicated below.
• Applying a password to the camera: Choose Select another action to
perform and click Next to return to the Select Action dialog. Proceed to “p
Protecting Wireless LAN Information Stored in the Camera (Applying a Password/
Resetting the Camera)” (A 23).
• Completing wireless settings: Proceed to “q Finishing Wireless Settings”
(A 25).
p
Q7115_Wireless_EN.book Page 23 Tuesday, June 3, 2008 7:34 PM
To Next Page
Loading...
