Uploading Pictures to the my Picturetown Server
48
C
When the Transfer is Unsuccessful
When transfer over a wireless LAN connection is unsuccessful, the
next time you select
A (Picture Bank) mode in the playback-mode
selection menu and press the k button, the confirmation dialog
shown at right will be displayed. If necessary, you can change the
SSID from the confirmation dialog. Select Yes to resume the
interrupted transfer. This confirmation dialog will not be displayed
when upload of all pictures using Picture Bank is initiated by
connecting the AC adapter (A 46).
C File Types Supported by Picture Bank
Still pictures, including those with voice memos attached, and movie files can be uploaded using
the Picture Bank service. Voice recording files cannot be uploaded.
C Picture Bank Images
Pictures that have been uploaded to the my Picturetown server are referred to as “Picture Bank
images” and can be recognized by L icon displayed with them in full-frame playback mode. Once
the icon has been displayed with a picture, that picture cannot be uploaded to the server a second
time using the automatic upload feature initiated when the AC adapter is connected to the camera.
If pictures have been deleted from the server, and you would like to upload them again, choose
A
(Picture Bank) mode from the playback-mode selection menu (A 47) and select the desired
pictures.
Resume interrupted transfer?
No
Change SSID
Ye s
Q7115_Wireless_EN.book Page 48 Wednesday, June 4, 2008 6:02 PM
Uploading Pictures to the my Picturetown Server
49
Connecting to a Wireless LAN
If the SSID selection screen is displayed when uploading pictures using the Picture Mail
(A 44) or Picture Bank (A 46, 47) service, follow the procedures indicated below to
select a wireless LAN network.
If the camera detects a network previously used to upload pictures using the Picture
Mail service, or the Picture Bank service while the AC adapter is connected to the
camera, picture upload will be initiated automatically.
1 Choose the desired SSID (network name) and press
the
k button.
SSIDs (up to ten) are listed in order of signal strength (A 52, 53).
The icon to the left of each SSID is displayed in red when out of
range.
The icon to the right of each SSID shows the status of the network
profile registered to each SSID:
B (home wireless LAN profile configured)
A (pubic wireless LAN profile configured)
See “Public Wireless LAN” (A iv) for more information on countries in which public
wireless LANs can be accessed by, and the wireless service providers that support
connection of, this camera.
-- (no profile configured)
If using the six-month complimentary T-Mobile HotSpot subscription, choose tmobile (in the
United States only).
2 Connection to the wireless LAN is attempted.
If the selected SSID has not been configured with the camera, or
you are connecting to it for the first time, the WEP key (A 9)
entry screen, or both the WEP key entry screen and the network
user name and password (A 10) entry screen, may be displayed.
Enter the information required for connection (A 31, 32).
The screens for connecting to the server, and for uploading
pictures to the server, will be displayed. To cancel upload, press the k button. When upload is
complete, the screen indicating transfer completion will be displayed. After upload is
complete, press the k button*.
* Once upload of all pictures using the Picture Bank service, initiated by connecting the AC
adapter, is complete, the camera turns off and the battery begins charging.
AP1
AP2
AP3
AP4
AP5
Select SSID
Back
Cancel
Connecting to access point
AP1
Connecting to server
Cancel
Cancel
002
/
004
Transferring images
to server.
11MB:available
Transfer complete.
Connection terminated.
Exit
Q7115_Wireless_EN.book Page 49 Wednesday, June 4, 2008 6:02 PM
To Next Page
Loading...
