Nikon COOLPIX S6150 - Disconnecting the Camera

140
Connecting to a Computer
Connecting to Televisions, Computers and Printers
When transfer is complete, the ViewNX 2 screen is displayed (ViewNX 2 default setting)
and transferred images are displayed.
For more information on using ViewNX 2, refer to the ViewNX 2 help information
(A 141).
Disconnecting the Camera
Do not turn off the camera or disconnect the camera from the computer during
transfer.
When transfer is complete, turn off the camera and disconnect the USB cable.
The camera turns off automatically if there is no communication with the
computer for 30 minutes while the camera is connected via the USB cable.
B Charging the Battery
T
he charge lamp slowly blinks green while the battery inserted into the camera is charging (A 142).