First Steps
8
2.
4 Close the battery-chamber/memory card slot cover.
Removing the Battery and Memory Card
Turn the camera off and make sure that the power-on lamp and the monitor have turned off,
and then open the battery-chamber/memory card slot cover.
• The camera, battery, and memory card may be hot immediately after using the camera.
Removing the Battery
• Move the battery latch in the direction indicated by the arrow (
1
)
to eject the battery (
2
).
Removing the Memory Card
• Gently push the memory card into the camera (
1
) to partially
eject the card (2).
To Next Page
Loading...
