E62
The Setup Menu
Reference Section
Operating the Blink Warning Screen
When the blink warning screen shown at right
is displayed in the monitor, the operations
described below are available.
If no operations are performed within a few
seconds, the camera automatically returns to
shooting mode.
Operation Icon Description
Enlarge the detected
face that blinked
g (i)
Rotate the zoom control to g (i).
If the camera detects more than one human subject
blinked, tap M or N to switch the display to another
face.
Switch to full-frame
playback
f (h) Rotate the zoom control to f (h).
Delete images E Tap E.
Switch to shooting
mode
I
Tap I. The shutter-release button can also be
pressed to return to shooting mode.
Did someone blink?
To Next Page
Loading...
