E7
Reference Section
Playing Back and Deleting Images Captured Continuously (Sequence)
Each series of images captured using the following settings is saved in a sequence.
Playing Back Sequences
In full-frame playback mode or thumbnail playback
mode (A 31), the first image of a sequence is used as
the “key picture,” i.e., it is displayed to represent the
images in the sequence.
While the key picture of a sequence is displayed in full-
frame playback mode, press the k button to display
each image in the sequence individually. To return to key
picture only display, press the multi selector H.
The following operations are available when each image in a sequence is
displayed individually.
• Select an image: Rotate the multi selector or press J or K.
• Zoom in: Rotate the zoom control to g (i) (A 31).
• Display the histogram and shooting information: Press the k button.
• Continuous shooting mode (A 50) • Scene mode (A 40)
- Continuous - Sports
- Pre-shooting cache - Pet portrait mode (when Continuous
is selected)
- Continuous H: 120 fps
- Continuous H: 60 fps
- Smile timer continuous
4/ 4
1 5 /1 1 / 2 01 1 15 : 3 0
15/11/2011 15:30
0004. JPG
Sequence display
1/ 5
1 5 /1 1 / 2 0 1 1 1 5 : 3 0
15/11/2011 15:30
0004.JPG
Back
Back
B Notes About Sequence
he camera cannot display images that were captured continuously as a sequence if the images
were captured with another make or model of digital camera.
B Notes About Images Captured in a Sequence
he histogram and shooting information are not displayed when only a sequence’s key picture is
displayed (A 8).