Nikon COOLPIX S9050 - Adjusting Exposure Compensation

44
Adjusting Brightness (Exposure Compensation), Vividness, and Hue
Basic Photography and Playback: A (Auto) Mode
Adjusting Exposure Compensation
When using scene mode or special effects mode, brightness (exposure
compensation) can be adjusted for taking pictures.
1 Press the rotary multi selector o (exposure
compensation).
The exposure compensation guide and histogram are
displayed.
2 Use the rotary multi selector to select a
compensation value.
To make the subject brighter, apply positive (+) exposure
compensation.
To make the subject darker, apply negative (–) exposure
compensation.
3 Press the k button to set the compensation value.
When an exposure compensation value other than 0.0 is applied, the value is displayed
with the H indicator in the monitor.
4 Press the shutter-release button to take a
picture.
To reset exposure compensation, repeat from step 1 and
set the value to 0.0, then press k button.
+0.3
Exposure compensation
+0.3
+0.3
Histogram
Exposure compensation
guide
Exposure compensation
value
2 5
25
+0.3
+0.3
C Histogram
See “Using the Histogram” (A 43) for more information.