Reference Section
E8
• On the screen displayed when R Special effects is selected, select the shooting
effect.
• When Selective color or Cross process is
selected, use the multi selector HI to select
the desired color, and press the k button to
apply the color. To change the color selection,
press the k button again.
y M R Special effects
Type Description
O Soft
(default setting)
Softens the image by adding a slight blur to the entire
image.
P Nostalgic
sepia
Adds a sepia tone and reduces the contrast to simulate the
qualities of an old photograph.
F High-contrast
mono.
Changes the image to black and white and gives it sharp
contrast.
I Selective color
Creates a black and white image in which only the
specified color remains.
l Pop
Increases the color saturation of the entire image to create
a bright look.
o Cross process
Gives the image a mysterious appearance based on a
specific color.
m Toy camera
effect 1
Gives the entire image a yellowish hue and darkens the
image periphery.
n Toy camera
effect 2
Decreases the color saturation of the entire image and
darkens the image periphery.
Save
1/250
F3.7
25
m
0s
880
To Next Page
Loading...
