Reference Section
E10
3 Stabilize the camera by using a tool such as a tripod.
4 Press the shutter-release button to
capture the first image.
• Set exposure compensation (A43) before
releasing the shutter for the first image.
Exposure compensation cannot be
changed after the first image is captured.
Focus and hue are fixed when the first
image is captured.
• The shutter is automatically released for the second and subsequent images.
• The monitor may turn off while the camera is not capturing images.
• Shooting ends automatically when 300 images are captured.
• To end shooting manually before 300 images are captured, press the k
button.
• Sound and still images cannot be saved.
B Notes About Time-lapse Movie
• The camera cannot capture images if a memory card is not inserted. Do not
exchange the memory card until shooting is complete.
• Use a fully charged battery to prevent the camera from turning off unexpectedly.
• Time-lapse movies cannot be recorded by pressing the b (e) button.
• Do not rotate the mode dial until shooting is complete.
• Vibration reduction is disabled regardless of the Photo VR setting in the setup
menu (A54).
AE-L
22m 5s
1/250
F3.7
End recording
To Next Page
Loading...
