1
With
the battery
installed,
connect
the
camera
to
an
elect
rica
I outlet.
Charging
AC
Adapter
•••••
Charge lamp
USB
cable
(included)
If
a plug adapter*
is
included with your camera, securely connect it
to
the
Charging
AC
Adapter.
Once
the
two
are
connected, attempting
to
forcibly
remove the plug adapter could damage the product.
* The shape
of
the plug adapter varies according
to
the country or region
in
which the camera
was
purchased.
This step can be
omitted
if
the plug adapter comes permanently bonded
to
the Charging
AC
Adapter.
•
The charge lamp
slowly
flashes green
to
indicate that the battery
is
charging.
•
When charging
is
complete, the charge lamp turns
off
. It
takes
about 2 hour
and
20
minutes
to
charge a fully exhausted battery.
•
The battery cannot be charged when the charge lamp quickly flashes green,
possibly due
to
one
of
the reasons described below.
-
The ambient temperature
is
not
suited
to
charging.
-
The
USB
cable or Charging
AC
Adapter
is
not properly connected.
-
The battery
is
damaged.
2
Disconnect
the
Charging
AC
Adapter
from
the
electrical
outlet
and
then
disconnect
the
USB
cable.
Preparing
for
Shootinq
I
9